AQUA-STOP Deck Finish Medium Oak 5L
Price: £58.99
Liberon AQUA STOP Tough Deck Finish Medium Oak 5 Litre.
- 3 in 1 Technology: colour, stain resistance and wood degeneration prevention in one
- Oil, food and water repellent
- Quick drying
- Long lasting protection
- Suitable for use on most timber decking
- Coverage (1 litre): 10-12m2
- Application: Brush/roller
- Drying Time: Touch dry 30 minutes, 2 hours final, wait 24 hours before use
- Clean tools with: Water
- Apply in temperatures between 5°C and 25°C in dry conditions
Using Liberon AQUA-STOP Tough Deck Finish
Liberon
AQUA-STOP Tough Deck Finish is an advanced 3 in 1 formulation of stain
protection, colour and timber sealer in one. It has been specially
formulated to suit most types of timber decking. Using innovative
water-based technology, Liberon AQUA-STOP Tough Deck Finish contains
natural oils that penetrate deep into the wood to prevent damage by
water and sunlight whilst guaranteeing long lasting protection against
weathering. Its liquid formula makes it easy to apply with a matt finish
which enhances the natural grain of the wood. It is safe to use around
animals and plants.
Application : Stir well before use. Ensure the surface is clean, dry and free from previous finishes and dust.
On
new wood: For hardwoods, it is recommended to leave the wood exposed
for up to 12 months before applying a finish. This allows the grain in
the wood to open and breath and aids adhesion of the finish.
On old
wood: Remove any previous finishes completely and clean the decking
thoroughly beforehand with Liberon Tough Deck Clean and Revive. Allow to
dry for 24 hours before applying a finish.
Apply a generous coat
of AQUA-STOP Tough Deck Finish with a paint brush or roller. Allow to
penetrate for 15 to 30 minutes (depending on the porosity of the wood).
Wipe off any excess with a lint-free cotton cloth. Leave to dry for 2
hours. Apply a second coat in the same way as the first. Wait 24 hours
before using your
decking.
Important :
The application process has a tendency to darken the natural colour of
the wood, however this will fade a few days after application. Always
test product on a spare surface or inconspicuous area for colour,
compatibility and end result. For tannelised timber, colour may vary.
Cleaning and Maintenance
: For general maintenance clean with Liberon AQUA-STOP Deck Aftercare
which will maintain the colour and appearance of AQUA-STOP Tough Deck
Finish without damaging it. The use of an aggressive cleaner is not
recommended as this may damage the finish.
Precautions :
Wear suitable clothing and protective gloves when using the AQUA-STOP
Tough Deck Finish. Store AQUA-STOP Tough Deck Finish at a temperature
above 5C. Always replace the lid otherwise the product can deteriorate.
Oily cloths can self combust. Do not leave impregnated cloths in
bundles. Lay out flat to dry or submerge in water before disposal.
Heath and Safety Keep
out of reach of children. Do not empty into drains. Do not allow to
freeze. Use only in well ventilated areas. Contains
hydroxybenzotriazole. May produce an allergic reaction.
VOC information EU
limit value for AQUA-STOP Tough Deck Finish (CatA/f): 150g/L (2007) –
130g/L (2010). AQUA-STOP Tough Deck Finish contains max 20g/L VOC.
Liberon AQUA-STOP
Tough Deck Finish Safety Data Sheet
Like the AQUA-STOP Deck Finish Medium Oak 5L? Take a look at these: