Liberon Pure Tung Oil 500ML
Price: £8.99
Liberon Pure Tung Oil 500ml.
A natural, fine and pure oil, Tung
Oil is the premium oil for woodcare. Ideal for use on food contact
surfaces, it is heat, water and alcohol resistant.
- Premium, pure and natural oil for wood care
- Ideal for use on food contact surfaces – kitchen worktops, chopping boards and salad bowls
- Provides a long lasting matt finish
- Water, heat and alcohol resistant
- EN71 Approved – safe for toys
- Suitable for interior and exterior use
- Recommended for use on external Oak
- Coverage (1 litre): 10-12m2
- Application: Brush/cloth
- Drying Time: 24 hours between coats, 4 days final
- Clean tools with: White Spirit
Use of Liberon Pure Tung Oil
Liberon
Pure Tung Oil is highly resistant to water, alcohol and food acids.
Providing a hard wearing finish it is ideal for surfaces such as kitchen
worktops, tables and all high quality interior wood. Pure Tung Oil,
with no added dryers, is a natural, non-toxic product which can be used
on toys and objects in contact with food such as salad bowls etc. Being a
penetrating oil it allows the wood to age gracefully and develop a
natural patina. Recommended for use on exterior oak.
Preparation :
Ensure the wood surface is bare: remove any wax finishes with Liberon
Wax and Polish Remover and any varnish finishes with Liberon Fine Wood
Stripper. Clean, dry and ensure the surface is dust free.
Application :
Apply Tung Oil using a brush or lint-free cotton cloth. For ease of
application dilute the first one or two coats with up to 50% white
spirit. Allow the oil to penetrate for 20 to 30 minutes then wipe off
the excess oil using a clean lint-free cloth. Allow to dry for 24 hours
between coats. Apply further coats of Tung Oil as above, reducing the
amount of white spirit used with subsequent coats. Allow 24 hours to
dry. Apply the last one or two coats of Tung Oil undiluted, as in
previous applications. After the final coat has been
applied and
excess removed leave for 24 hours and wipe over again to aid drying and
remove any oil that may have surfaced. We recommend a minimum of 4
coats; more coats will be required for porous or external surfaces. For
best results gently rub with Liberon Ultra Fine Steel Wool (0000)
between coats. Leave for a few days before use to allow the Pure Tung
Oil to dry fully.
Important
: Oil finishes bring out the natural colours of timber. A wet surface
will be an indication of the final colour. Always test product on a
spare surface or inconspicuous area for colour, compatibility and end
result.
Cleaning and maintenance
: Pure Tung Oil must be maintained on a regular basis. Apply at least
once or twice a year or more if required, depending upon exposure to the
weather and usage. On exposed external timbers it is important to apply
sufficient coats of oil to give the initial protection.
Precautions
: Tung Oil is extracted from nuts and may cause an allergic reaction.
Store Liberon Tung Oil at a temperature above 5 °C. Always replace the
lid otherwise the oil can deteriorate. Oily cloths can self combust. Do
not leave impregnated cloths in bundles. Before discarding lay them flat
outside to dry to avoid a fire hazard. If the excess is not removed and
the surface becomes sticky, wipe with white spirit to remove the sticky
film and allow to dry before continuing.
Liberon Pure Tung Oil Safety Data Sheet
Like the Liberon Pure Tung Oil 500ML? Take a look at these: