Liberon Finishing Oil 500ML
Liberon Finishing Oil 500ml.
Blend of high quality oils which nourish and enhance the colour of the wood.
Provides a hardwearing and water resistant surface that is heat, alcohol and food acid resistant.
- Safe for toys
- Finishing Oil
- Nourishes and enhances the colour of wood
- Ideal for surfaces requiring a hard wearing and water resistant finish
- Water, heat, alcohol and food acid resistant
- Matt, satin or gloss finish depending upon the number of coats applied
- Suitable for all types of bare wood
- Ideal for kitchens and bathrooms
- EN71 Approved – safe for toys
- Coverage (1 litre): 10-12m2
- Application: Brush/cloth
- Drying Time: 5 hours minimum
- Clean tools with: White Spirit
Using Liberon Finishing Oil
Finishing Oil is a blend of high quality oils for use on all interior
wood, turned woodwork and wooden toys. It is suitable for use on
worktops, kitchen tables and bathroom furniture and can also be applied
to cork, stone and terracotta. Preparation
: Ensure the surface is bare: remove any wax and any varnish finishes.
Clean, dry and ensure the surface is dust free. If required stain the
wood before oiling. Application
: Shake well before use. Apply a coat of Liberon Finishing Oil using a
brush or lint-free cotton cloth. Allow the oil to penetrate for up to 10
minutes then wipe off all the excess with a clean lint-free cloth,
before the surface dries enough to become sticky. Allow to dry for a
minimum of 5 hours and apply more coats as required. We recommend a
minimum of 3 coats. The more coats applied the higher the sheen and the
more durable the finish will be. For best results gently rub with
Liberon Ultra Fine Steel Wool (0000)
between coats. Important
Oil finishes bring out the natural colours of timber. A wet surface
will be an indication of the final colour. Always test product on a
spare surface or inconspicuous area for colour, compatibility and end
result. Cleaning and maintenance
: Surfaces may be cleaned using a damp cloth and spills should be wiped
up immediately. For stubborn stains a mild detergent can be used.
Surfaces need to be re-oiled once a year or more, depending upon usage.
Liberon Finishing Oil at a temperature above 5 °C. Always replace the
lid otherwise the oil can deteriorate. Oily cloths can self combust. Do
not leave impregnated cloths in bundles. Before discarding lay them flat
outside to dry to avoid a fire hazard. If the excess is not removed and
the surface becomes sticky, wipe with white spirit to remove the sticky
film and allow to dry before continuing. Health and Safety
Repeated exposure may cause skin dryness or cracking. Keep out of the
reach of children. Do not empty into drains. Use only in well-ventilated
areas. If swallowed, seek medical advice immediately and show this
container or label. Contains cobalt compound and methylehtylketoxime.
May produce an allergic reaction. Liberon Finishing Oil Safety Data Sheet
Like the Liberon Finishing Oil 500ML? Take a look at these: