Liberon Knotting Pale 250ML
Liberon Knotting Pale 250ml.
Helps to prevent seepage from knots in resinous woods, especially pine prior to painting.
- Reduces resin seepage from knots especially in softwoods
- Suitable for use on all types of wood
- Ideal for use before painting
- Drying Time: Touch dry 15 minutes. Final 2 hours.
- Application: Brush
- Clean tools with: Methylated Spirit
Using Liberon Knotting
Liberon Knotting helps to prevent seepage from knots in resinous woods prior to painting and helps to minimises the discolouration of paint finishes. Liberon Knotting is pale in colour and may be used with clear varnish finishes. Preparation
: Ensure the surface is bare, remove any wax finishes with Liberon Wax and Polish Remover and any varnish/paint finishes with Liberon Fine Wood Stripper. If the wood is to be dyed or stained, this must be completed prior to the application of Liberon Knotting. Application
: Ensure the surface is clean, dry and free from dust. Apply one cost only of Liberon Knotting directly onto the knots. Touch dry in 15 minutes but leave to dry a further 2 hours before applying any finishes. Important
: Liberon Knotting is not recommended for oiled or waxed surfaces. Always test product first on a spare surface or inconspicuous area to check colour, compatibility and end results. Health and Safety
Highly flammable. Keep out of the reach of children. Keep away from sources of ignition – No Smoking. Do not empty into drains. Take precautionary measures against static discharges. Use only in well-ventilated areas.Liberon Knotting Safety Data Sheet
Like the Liberon Knotting Pale 250ML? Take a look at these: